一种新颖的SPMSM驱动系统自适应死区补偿方法

逆变器死区效应将造成电机电流畸变,为提高表贴式永磁同步电机电流控制精度,提出一种自适应死区电压补偿策略。该方法利用参考电流建立d、q轴死区电压核函数,能够在表贴式永磁同步电机电阻、电感参数未知的情况下,对d、q轴死区电压的幅值进行辨识,将辨识的电压幅值与其核函数相乘得到所需补偿的死区电压。从而解决了输死区电压造成的相电流畸变难题。仿真结果表明,所提出的电流控制策略能够有效减少相电流谐波含量、提高电流控制精度。     

Temporal information based GoP adaptation for linear video delivery schemes

An original wireless video transmission scheme called SoftCast has been recently proposed to deal with the issues encountered in conventional wireless video broadcasting systems (e.g. cliff effect). In this paper, we evaluate and optimize the performance of the SoftCast scheme according to the transmitted video content. Precisely, an adaptive coding mechanism based on GoP-size adaptation, which takes into account the temporal information fluctuations of the video, is proposed. This extension denoted Adaptive GoP-size mechanism based on Content and Cut detection for SoftCast (AGCC-SoftCast) significantly improves the performance of the SoftCast scheme. It consists in modifying the GoP-size according to the shot changes and the spatio-temporal characteristics of the transmitted video. When hardware capacities, such as buffer or processor performance are limited, an alternative method based only on the shot changes detection (AGCut-SoftCast) is also proposed. Improvements up to 16 dB for the PSNR and up to 0.55 for the SSIM are observed with the proposed solutions at the cut boundaries. In addition, temporal visual quality fluctuations are reduced under 1dB in average, showing the effectiveness of the proposed methods.     

农村饮用水水源地硝酸盐污染特性研究

农业面源污染是农村饮用水水源地的主要污染因素,其中以硝酸盐污染问题最为突出。根据山东省沂水县域内279处地下水型农村饮用水水源地水质检测结果,本文从取水深度、海拔高程、地形坡度等3个方面对农村饮用水水源地的硝酸盐污染特性进行了系统研究。结果表明,水源地硝酸盐超标率和超标程度均会随着水源地取水深度、海拔高程以及地形坡度的升高而降低。研究结论可为主管部门采取有效的预防和治理措施提供借鉴,并可指导新建水源地的选址。     

光伏系统用于漏电流测量的霍尔闭环传感器设计

基于闭环磁通门技术的传感器广泛应用在测量大电流中的小剩余电流以及噪声共模电流。这类传感器的精度以及对大电流的隔离能力使之成为漏电流检测的最优方案,但通常缺点是成本昂贵且体积庞大。本文介绍了一种新型小尺寸且利用霍尔闭环技术对太阳能系统中的漏电流进行测量的传感器:新一代的LDSR产品。     

基于JJG(闽)1086-2018放射治疗CT模拟定位机X射线辐射源的质控分析

整个精确放疗流程最关键、最基础的一个环节就是定位CT扫描精确程度,做好定位CT的质控关乎整个放疗流程的成败。介绍了JJG(闽)1086-2018放射治疗CT模拟定位机X射线辐射源在检定和质控中的流程和方法,从剂量性能要求、图像成像质量和机器机械精度方面对CT模拟定位机的质量控制做了定量的要求。连续8个月的测试结果表明:CT测量值误差在30HU以内,图像均匀性≤5.0HU,空间分辨力7Lp/cm,低对比度分辨力在对比度为1.0%,0.5%,0.3%时分别≤3.0mm,≤5.0mm,≤6.0mm,达到了规程的要求。CT模拟定位机的图像质量和机械精确程度得到了很好的保障,定位CT的剂量准确,影像参数和位置精确度有规可循。     

Effect of multi pulse current treatment on microstructure and microhardness of resistance spot welded dual phase steel DP590

In this paper, microhardness and microstructural characteristics of dual phase DP590 steel resistance spot weld joint under two different welding conditions (i. e. single pulse and multi pulse) were studied. It was observed that applying multi pulse currents resulted in quasi-equiaxed grains of tempered martensite in fusion zone (FZ) of the weldment. The refinement of microstructure in fusion zone using multi pulse current treatment resulted in reduced hardness of the weld joint.     

Second order velocity slip and thermal jump of Cu–water nanofluid over a cone in the presence of nonlinear radiation and nonuniform heat source/sink using homotopy analysis method

The purpose of the present paper is to explore the second order slip effects on nanofluid flow over a vertical cone. The effects of nonlinear thermal radiation and nonuniform heat source/sink are also taken into account. Water with copper nanoparticles is used as nanofluid in this investigation. The governing partial differential equations for the flow are converted into ordinary differential equations by using transformations and then are solved using homotopy analysis method. The influence of various important parameters on velocity, temperature, skin‐friction, and Nusselt number are presented through graphs. Results indicate that the velocity and magnitude of skin friction decrease with a rise in first and second order velocity slips. A raise in either first or second order temperature jump causes a fall in temperature. Nonlinear radiation increases the more rapidly when compared to the linear radiation case.     

电流驰豫法测试氧化镧掺杂的氧化铈中氧离子迁移

采用甘氨酸-硝酸盐法(GNP)合成了Ce0.65La0.35O1.825(LDC)粉末,在1400℃下烧结10 h得到陶瓷试样,用XRD和SEM表征了样品的物相和表面形貌。用直流电场测试了试样在不同温度下的电流驰豫现象,并计算了不同温度下试样中迁移氧离子数目和材料直流电导率。结果表明,在固态电解质材料中突然施加强电场,可迁移离子基本都发生了位置偏移,但极少部分可以产生长程迁移。随着温度的升高,样品中发生迁移的氧离子数目增加,但都远小于氧空位总量。迁移氧离子数目与温度之间满足阿累尼乌斯公式,其迁移活化能为0.83 eV。     

离子膜法烧碱生产系统中电解整流控制系统的优化

针对20万t/a离子膜法烧碱装置中整流及其控制系统在长期运行过程中的不足,和引起系统不稳定的一些因素,提出了优化改进方法,以确保整流系统的安全、稳定运行。